Post #8 DIY Friendship Bracelets

Hello again dear readers!
Today I decided to write a DIY post.We're making friendship bracelets!They are so easy to make, and It only takes 15 or 20 minutes to make them.
Before we get started I wanna thank you on 16 followers, I know It's not much but it means a lot to me.So thank you!
Now, let's get started! 



Zdravo ponovo dragi čitaoci!
Danas sam odlučila da napišem jedan DIY post.Pravićemo narukvice prijateljstva!Mnogo ih je lako napraviti, a za to vam ne treba puno vremena.
Pre nego što počnemo, želim da vam se zahvalim na 16 pratioca, znam da to nije puno ali meni mnogo znaci.Hvala vam!
Sada, hajde da počnemo
         

You will need a piece of cardboard, a glass (or any other round object) , pencil, thread, a button and scissors.
 
Trebaće vam parče papira ili kartona, čaša, olovka, konac bilo koje boje, dugme i makaze.

1. The first step is to take your rounded object, and to place it on a piece of cardboard.Then with a help of it draw a circle.And cut it out with scissors.


1. Prvi korak je da uzmete čašu, da je stavite na parče papira i da pomoću nje nacrtate krug.
A kada nacrtate krug, isecite ga.

  
 2. Then mark the center of the circle.And make eight little lines on the outer edge dividing the circle into eight.

2. Zatim označite centar kruga.I nacrtajte 8 malih linija na spoljašnjoj ivici kruga.







3. Take the scissors and make short cuts along 
the lines.Then take your pencil, and with It's tip
push through the circle's center, to make a little hole.It should look like this. →


3. Uzmite makaze i napravite male rezove duž linija koje ste malopre nacrtali.Zatim, uzmite olovku i njome probušite centar kruga.To bi trebalo ovako da izgleda. →

4. Your loom is ready.
Now you need to cut the thread.You can make it as long as you want.Then fold the thread in half and knot it together.(After you fold it you should have 8 ends of the thread). Like It's shown on the pictures.







 4. Vaš tzv. razboj je spreman.
Sada treba da isečete konac.Trebalo bi da imate 8 krajeva konca, nakon sto ih presavijete.Mogu biti bilo koje dužine.Zatim ih zavežite zajedno u čvor, kao što je prikazano na slikama.







 

 5. Now you have 8 ends of a thread coming 
out of a knot.We need just seven of them so 
take one end and cut it off very close to the knot.

5. Sada imamo 8 krajeva konca koji izlaze iz čvora.Treba nam samo sedam, zato uzmite jedan i isecite ga.

6. The next thing you need to do is to push the 
knot through the center of your loop, like this →


6. Sledeća stvar koju treba da uradite je da čvor gurnete kroz centar kruga.




 

7. Next you just need to place the ends into the loop's cuts.One cut should stay free.


7. Samo rasporedite konac u rezove na vašem razboju.Jedan rez bi trebalo da ostane prazan.





 
8. The empty cut should face towards you.
You should count to three, and then you should take the third end and place it into the empty cut.And you just continue doing that until your bracelet is long enough.  
 
8. Prazan rez bi trebalo da bude ispred vas.
Brojite končiće do tri, i treći prebacite u prazan rez.Nastavite to da radite dok vaša narukvica ne bude dovoljno duga.




9. Make a little knot to secure your work.
After that choose one thread, and place the button on.Again make a little knot to secure it.
Then cut the thread which is an excess and you are all done.

9. Zavežite mali čvor kako biste osigurali vaš rad.Nakon toga izaberite jedan konac i stavite dugme na njega.Ponovo zavežite male čvoriće oko dugmeta.
Zatim isecite konac koji je višak.
To je to, završili ste.

 Now you've got these beautiful bracelets.
I hope you've enjoyed this post.Thank you for reading, and I guess I'll see you soon.

Sada imate ove lepe narukvice.
Nadam se da vam se dopao post.
Vidimo se uskoro :) 

I'm sorry people for the color of the letters, I can't change it.
  
P.s This DIY is not my idea, I've found it on the internet.